Tint Base - Oasis 15ml

Thanks to its dense pigmentation and elasticity, the OASIS shade base creates a perfectly even coverage even after applying the first layer.

Shade: green

Collection: ARIZONA

Consistency: medium

Stiffness/elasticity: elastic

Acidity: neutral, pH=6.7

Smell: neutral

Pigmentation: dense, covers the free edge

Application method:

Thoroughly degrease the nail plate with phBond dehydrator.

Apply Ultrabond acid-free primer to the tip of the nail and wait for the liquid to dry completely.
Apply a layer of transparent Rubber base as a substrate and cure for 30 seconds.

Apply one or two layers of Tint base. The polymerization time in a UV/LED lamp is 60 seconds.

Apply the finishing coat (top) as the final layer.

Volume: 15 ml

Manufacturer: TM "HELLO. by NAILSMADE"

Country Ukraine

INCI composition: Acrylates Copolymer, HEMA, Trimethylbenzoyl Diphenylphosphine Oxide, Silica Dimethyl Silylate.

May contain: CI 77891, CI 18965, CI 51319, CI 73915, CI 73360, CI 15510.
WARNING! To avoid unwanted polymerization of the material during work, testing, or shooting content, the open bottle or brush should be kept as far as possible from daylight (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is enough for the material to begin to polymerize. When painting tips, we recommend keeping the working side of the working UV lamp away from the master. If you hold the light on the lamp towards the master, unwanted polymerization of the material on the brushes and on the necks of the open vials may occur.

Note: All documents are in attached files!

How to prevent bubbles in the material?

Bubbles can appear in any liquid. It does not depend on the formula or the ingredients. It depends on the density (viscosity).
It's just a law of physics, nothing else.

For example, in water, bubbles last a very short time and come out by themselves.
If we take thicker liquids (honey, thick gel for building up, etc.) - in these products, bubbles willingly settle and do not leave them as quickly as water.

And so with the base. If you work with a brush carelessly, sharply dipping it into the bottle, it unwittingly acts as a blender that mixes the material with air, forming bubbles. This is especially true for materials in bottles with a brush.

That's why we make CAREFUL, gentle movements with a brush!
Especially when the bottle is new and full.

When we were working on the development of the tint base product, we had a choice of density. We deliberately chose the consistency of medium thickness because it has advantages:
- the material does not run anywhere, does not flow;
- contours are clear without extra effort;
- the master calmly teaches the architecture and has time to check it by reflection;
- there is no need to apply a second layer to complete the architecture or camouflage the free edge.

Our production has equipment that prevents the formation of bubbles in the material at all stages - from mixing the pigment to bottling.

We also warn our partners that we are against the fact that the consultant in the store opens the bottle for the client and shows the material. Because a consultant who is not a craftsman does not understand that you can make bubbles with a brush without even realizing it.
Not to mention the fact that the necks of the bottles have an unsightly appearance when they are contaminated with material to the very top.

If bubbles appear in the material, how to fix it?

Unscrew the cap of the bottle, but do not remove the brush.
Put in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).

According to the laws of physics, molecules move faster in a warm environment, and this speeds up the process.
Air will rise to the surface, it is lighter than liquid.

HELLO. Tint Base - Oasis 15ml can be shipped with domestic US, Canada or international delivery. Meew Nails Store offers FREE domestic USA delivery on orders from $100.